SG赛车在线计划

BL-A5948 SPECIFICATIONS

   Laser Working Area:  1500 mm × 1200 mm (59 in x 48 in)
   Pass-Through Working Area:  1000 mm wide materials with unlimited length can be processed in 1200 mm increments. 40 inch wide materials with unlimited length can be processed in 48 inch increments
   Working Area Depth:  The motorized table can be lowered 400mm (16 inches) for processing objects.  The pass-through material maximum height is 16 mm (0.625 inch)
   Sealed CO2 Laser:  60 watt (standard) / 80 watt / 100 watt / 150 watt / 200 watt (200 watt metal tube or glass tube)
   Closed Loop Chiller (distilled water):  All lasers include chillers that are properly sized to laser power
   Laser Table for Cutting:  Honeycomb table (standard) / Metal Slat (reduces back reflection marks on acrylic)
   Laser Beam Delivery:  63 mm (2.5 in) focus lens with nozzle (standard) / High Performance USA with air/gas assist
   Motion Control System:  Chinese Made Software--English Language Version (standard) / High Performance USA Control Motion and Software
   Operating Systems:  Windows 2000/XP (standard) / unlimited
   Supported Graphics:  BMP, HPGL, PLT, DXF, DST, AI (standard) / unlimited
   Compatible Design Software:  CorelDraw version 12, AutoCAD, Photoshop / unlimited
   Data Transfer Interface:  USB
   Motors:  Stepper
   Resolution:  ±0.1 mm (± 0.004 inch)
   Engraving Speed:  0-60,000 mm/min (0-2,400 in/min)
   Rotary:  none (standard) / surface driven rotary / center driven rotary
   Additional Laser Nozzles with Lenses:  none (standard) / 100 mm (4 in) / 125 mm (5 in) / 190 mm (7.5 in)
   Exhaust and Filtration:  Exhaust Blower with two hoses (standard) / Filtration System 
   Power supply:  AC 110 - 220 V ±10%, 50 - 60 Hz 
   Operating Temperature:  0 - 45 DEG C (32 - 112 DEG F)
   Operating Humidity:  5% - 95%
   Machine Power Requirements (excluding chiller):  < 1000 watts (standard)
   Machine Dimensions (excluding chiller):  212 cm x 161 cm x 207 cm (83 in x 63 in x 42 in)
   Machine Weight:  350 kg (770 lbs) standard
   Packaging Dimensions and Weight:  229 cm x 178 cm x 132 cm 464 kg (132 in x 90 in x 70 in 1020 lbs) standard

Materials Cutting by Laser Power*:

* Laser Laboratory measured results.  Individual user results may vary.

BL-A4832 SPECIFICATIONS
   Laser Working Area:  1200 mm × 800 mm (48 in x 32 in)
   Pass-Through Working Area:  1000 mm wide materials with unlimited length can be processed in 800 mm increments. 40 inch wide materials with unlimited length can be processed in 32 inch increments
   Working Area Depth:  The motorized table can be lowered 400mm (16 inches) for processing objects.  The pass-through material maximum height is 16 mm (0.625 inch)
   Sealed CO2 Laser:  60 watt (standard) / 80 watt / 100 watt / 150 watt / 200 watt (200 watt metal tube or glass tube)
   Closed Loop Chiller (distilled water):  All lasers include chillers that are properly sized to laser power
   Laser Table for Cutting:  Honeycomb table (standard) / Metal Slat (reduces back reflection marks on acrylic)
   Laser Beam Delivery:  63 mm (2.5 in) focus lens with nozzle (standard) / High Performance USA with air/gas assist
   Motion Control System:  Chinese Made Software--English Language Version (standard) / High Performance USA Control Motion and Software
   Operating Systems:  Windows 2000/XP (standard) / unlimited (option with High Performance USA Control)
   Supported Graphics:  BMP, HPGL, PLT, DXF, DST, AI (standard) / unlimited (option with High Performance USA Control)
   Compatible Design Software:  CorelDraw version 12, AutoCAD, Photoshop / unlimited (option with High Performance USA Control)
   Data Transfer Interface:  USB
   Motors:  Stepper
   Resolution:  ±0.1 mm (± 0.004 inch)
   Engraving Speed:  0-60,000 mm/min (0-2,400 in/min)
   Rotary:  none (standard) / surface driven rotary / center driven rotary
   Additional Laser Nozzles with Lenses:  none (standard) / 100 mm (4 in) / 125 mm (5 in) / 190 mm (7.5 in)
   Exhaust and Filtration:  Exhaust Blower with two hoses (standard) / Filtration System (option)
   Power supply:  AC 110 - 220 V ±10%, 50 - 60 Hz 
   Operating Temperature:  0 - 45 oC (32 - 112 oF)
   Operating Humidity:  5% - 95%
   Machine Power Requirements (excluding chiller):  < 1000 watts (standard)
   Machine Dimensions (excluding chiller):  173 cm x 102 cm x 107 cm (68 in x 48 in x 42 in)
   Machine Weight:  220 kg (485 lbs) standard
   Packaging Dimensions and Weight:  180 cm x 132 cm x 132 cm 370 kg (71 in x 52 in x 52 in 550 lbs) standard

BL-A3624 SPECIFICATIONS
   Laser Working Area:  900 mm × 600 mm (36 in x 24 in)
   Pass-Through Working Area:  600 mm wide materials with unlimited length can be processed in 600 mm increments. 24 inch wide materials with unlimited length can be processed in 24 inch increments
   Working Area Depth:  The motorized table can be lowered 400mm (16 inches) for processing objects.  The pass-through material maximum height is 16 mm (0.625 inch)
   Sealed CO2 Laser:  60 watt (standard) / 80 watt / 40 watt / 30 watt (options)
   Closed Loop Chiller (distilled water):  All lasers include chillers that are properly sized to laser power
   Laser Table for Cutting:  Honeycomb table (standard) / Metal Slat (reduces back reflection marks on acrylic)
   Laser Beam Delivery:  63 mm (2.5 in) focus lens with nozzle (standard) / High Performance USA with air/gas assist
   Motion Control System:  Chinese Made Software--English Language Version (standard) / High Performance USA Control Motion and Software
   Operating Systems:  Windows 2000/XP (standard) / unlimited (option with High Performance USA Control)
   Supported Graphics:  BMP, HPGL, PLT, DXF, DST, AI (standard) / unlimited (option with High Performance USA Control)
   Compatible Design Software:  CorelDraw version 12, AutoCAD, Photoshop / unlimited (option with High Performance USA Control)
   Data Transfer Interface:  USB
   Motors:  Stepper
   Resolution:  ±0.1 mm (± 0.004 inch)
   Engraving Speed:  0-60,000 mm/min (0-2,400 in/min)
   Rotary:  none (standard) / surface driven rotary / center driven rotary
   Additional Laser Nozzles with Lenses:  none (standard) / 100 mm (4 in) / 125 mm (5 in) / 190 mm (7.5 in)
   Exhaust and Filtration:  Exhaust Blower with two hoses (standard) / Filtration System (option)
   Power supply:  AC 110 - 220 V ±10%, 50 - 60 Hz 
   Operating Temperature:  0 - 45 oC (32 - 112 oF)
   Operating Humidity:  5% - 95%
   Machine Power Requirements (excluding chiller):  < 1000 watts (standard)
   Machine Dimensions (excluding chiller):  137 cm x 101 cm x 107 cm (54 in x 40 in x 42 in)
   Machine Weight:  220 kg (485 lbs) standard
   Packaging Dimensions and Weight:  147 cm x 109 cm x 132 cm 330 kg (58 in x 43 in x 52 in 726 lbs) standard
  

Bell Laser Systems Available

Two types of laser systems dominate the commercial laser market. Each has its strengths in various cutting and marking applications.

CO2 Laser Systems: CO2 refers to the gas mixture used to generate the laser beam. CO2 laser systems used in the engraving and marking industry can range from 10 watts of power to over 1000. Most compact laser systems are offered in the 10 to 80 watt ranges. These units are capable of marking or engraving wood, glass, Plexiglas, acrylic, rubber, ceramics, coated metals and marble. In the higher wattage (40 or greater), material such as acrylic may be completely and accurately cut out to form various shapes.

YAG Laser Systems: These systems operate with a shorter infrared wavelength and are substantially more expensive than CO2 laser systems. These systems are used largely in industrial applications such as cutting, welding, heat treating, perforating and marking. YAG lasers are also used to engrave (mark) bare metals that under normal conditions cannot be marked by a CO2 laser system.

Related Software and Technique Terms

Air Assist: The air assist directs a constant stream of compressed air across the engraving or cutting surface at the point of burn. An invaluable tool for deep, clean engraving and cutting, the air assist removes the heat and combustible gases from the surface of the material. This allows you to use all of the available laser power to cut deeply into materials such as wood, acrylic, rubber or other materials that are susceptible to burning and scorching.

Bitmaps: In general terms, bitmaps are patterns of dots that blend together to form pictures. They are dot-like computer images designed to display on computer screens and print in ink. Collections of dots make up raster images, which do not have vector outlines, and therefore cannot be engraved without "vectorizing". A computer scanner creates raster images, as well as most paint-type computer programs. Grayscale or monochrome bitmaps are used when engraving photographs. Color bitmaps are not recommended for laser engraving.

Engraving Power: The amount of laser power that is applied to the material surface. For a given speed, the higher the power setting, the deeper the cut or engraving. Adjustable in 1% increments, the power can be controlled from either your computer or from the laser control panel. Power can also equate to speed. For a given depth of cut, a 50 watt laser can travel significantly faster than a 30 watt laser and achieve the same depth of cut without a subsequent loss in quality. This means with a higher watt laser, you can produce more products faster. In addition, a 50-watt laser will also cut through thicker materials than either a 10 or 30 watt laser system.

Engraving Speed: The speed at which the engraving head travels is expressed in inches per second (IPS). High speeds mean high productivity. Speed is also used to control the depth of cut. For a given power level, the slower the speed, the deeper the laser will engrave or cut. The speed is adjustable in 1% increments and can be controlled either from your computer or from the control panel on the laser engraver.

Raster Engraving: Raster engraving can best be described as very high-resolution dot matrix printing. Used to create highly detailed graphic images, the laser head scans back and forth, left to right, engraving a series of dots one line at a time. As the laser head moves down, line by line, the dot pattern begins to form the image that was printed from your computer. Scanned images, text and clipart are types of graphic images that are normally raster engraved at resolutions up to 1200 DPI.

Resolution Resolution: Raster resolution is a measure of the image quality that can be achieved with a laser engraver. Resolution is expressed in dots per inch (DPI) and is determined by the number of lines or dots that are engraved for every inch of movement. The higher the resolution, the finer the detail that can be achieved.

Vector Cutting: Different from raster engraving, vector is a continuous path that follows the outline, or profile of an image. Vector cutting is normally used to cut completely through materials such as wood, acrylic, paper, etc. It can also be used for quick marking of characters and geometric patterns.

BL-A2012 SPECIFICATIONS
   Laser Working Area:  500 mm × 300 mm (20 in x 12 in)
   Pass-Through Working Area:  400 mm wide materials with unlimited length can be processed in 300 mm increments. 16 inch wide materials with unlimited length can be processed in 12 inch increments
   Working Area Depth:  The motorized table can be lowered 400mm (16 inches) for processing objects.  The pass-through material maximum height is 16 mm (0.625 inch)
   Sealed CO2 Laser:  60 watt (standard) / 40 watt (optional)
   Closed Loop Chiller (distilled water):  All lasers include chillers that are properly sized to laser power
   Laser Table for Cutting:  Honeycomb table (standard) / Metal Slat (reduces back reflection marks on acrylic)
   Laser Beam Delivery:  63 mm (2.5 in) focus lens with nozzle (standard) / High Performance USA with air/gas assist
   Motion Control System:  Chinese Made Software--English Language Version (standard) / High Performance USA Control Motion and Software
   Operating Systems:  Windows 2000/XP (standard) / unlimited (option with High Performance USA Control)
   Supported Graphics:  BMP, HPGL, PLT, DXF, DST, AI (standard) / unlimited (option with High Performance USA Control)
   Compatible Design Software:  CorelDraw version 12, AutoCAD, Photoshop / unlimited (option with High Performance USA Control)
   Data Transfer Interface:  USB
   Motors:  Stepper
   Resolution:  ±0.1 mm (± 0.004 inch)
   Engraving Speed:  0-60,000 mm/min (0-2,400 in/min)
   Rotary:  none (standard) / surface driven rotary / center driven rotary
   Additional Laser Nozzles with Lenses:  none (standard) / 100 mm (4 in) / 125 mm (5 in) / 190 mm (7.5 in)
   Exhaust and Filtration:  Exhaust Blower with two hoses (standard) / Filtration System (option)
   Power supply:  AC 110 - 220 V ±10%, 50 - 60 Hz 
   Operating Temperature:  0 - 45 oC (32 - 112 oF)
   Operating Humidity:  5% - 95%
   Machine Power Requirements (excluding chiller):  < 1000 watts (standard)
   Machine Dimensions (excluding chiller):  135 cm x 78 cm x 89 cm (53 in x 31 in x 35 in)
   Machine Weight:  150 kg (330 lbs) standard
   Packaging Dimensions and Weight:  147 cm x 90 cm x 101 cm 220 kg (58 in x 35 in x 40 in 484 lbs) standard

BL-A1612 SPECIFICATIONS
   Laser Working Area:  400 mm × 300 mm (16 in x 12 in)
   Working Area Depth:  The manual movement table can be lowered 75 mm (3 inches) for processing objects.  
   Sealed CO2 Laser:  40 watt 
   Closed Loop Chiller (distilled water):  All lasers include chillers that are properly sized to laser power
   Laser Table for Cutting:  Honeycomb table (standard)
   Laser Beam Delivery:  63 mm (2.5 in) focus lens with nozzle (standard) 
   Motion Control System:  Chinese Made Software--English Language Version (standard) / High Performance USA Control Motion and Software
   Operating Systems:  Windows 2000/XP (standard) / unlimited (option with High Performance USA Control)
   Supported Graphics:  BMP, HPGL, PLT, DXF, DST, AI (standard) / unlimited (option with High Performance USA Control)
   Compatible Design Software:  CorelDraw version 12, AutoCAD, Photoshop / unlimited (option with High Performance USA Control)
   Data Transfer Interface:  USB
   Motors:  Stepper
   Resolution:  ±0.1 mm (± 0.004 inch)
   Engraving Speed:  0-60,000 mm/min (0-2,400 in/min)
   Exhaust and Filtration:  Exhaust Blower with two hoses (standard) / Filtration System (option)
   Power supply:  AC 110 - 220 V ±10%, 50 - 60 Hz 
   Operating Temperature:  0 - 45 oC (32 - 112 oF)
   Operating Humidity:  5% - 95%
   Machine Power Requirements (excluding chiller):  < 1000 watts (standard)
   Machine Dimensions (excluding chiller):  110 cm x 64 cm x 44 cm (43 in x 25 in x 17 in)
   Machine Weight:  44 kg (97 lbs) standard
   Packaging Dimensions and Weight:  121 cm x 75 cm x 53 cm 110 kg (48 in x 30 in x 21 in 242 lbs) standard

BL-A1208 SPECIFICATIONS
   Laser Working Area:  300 mm × 200 mm (12 in x 8 in)
   Working Area Depth:  The manual movement table can be lowered 75 mm (3 inches) for processing objects.  
   Sealed CO2 Laser:  30 watt 
   Closed Loop Chiller (distilled water):  All lasers include chillers that are properly sized to laser power
   Laser Table for Cutting:  Honeycomb table (standard)
   Laser Beam Delivery:  63 mm (2.5 in) focus lens with nozzle (standard) 
   Motion Control System:  Chinese Made Software--English Language Version (standard) / High Performance USA Control Motion and Software
   Operating Systems:  Windows 2000/XP (standard) / unlimited (option with High Performance USA Control)
   Supported Graphics:  BMP, HPGL, PLT, DXF, DST, AI (standard) / unlimited (option with High Performance USA Control)
   Compatible Design Software:  CorelDraw version 12, AutoCAD, Photoshop / unlimited (option with High Performance USA Control)
   Data Transfer Interface:  USB
   Motors:  Stepper
   Resolution:  ±0.1 mm (± 0.004 inch)
   Engraving Speed:  0-60,000 mm/min (0-2,400 in/min)
   Exhaust and Filtration:  Exhaust Blower with two hoses (standard) / Filtration System (option)
   Power supply:  AC 110 - 220 V ±10%, 50 - 60 Hz 
   Operating Temperature:  0 - 45 oC (32 - 112 oF)
   Operating Humidity:  5% - 95%
   Machine Power Requirements (excluding chiller):  < 1000 watts (standard)
   Machine Dimensions (excluding chiller):  80 cm x 57 cm x 44 cm (31 in x 22 in x 17 in)
   Machine Weight:  41 kg (90 lbs) standard
   Packaging Dimensions and Weight:  121 cm x 75 cm x 53 cm 100 kg (48 in x 30 in x 21 in 220 lbs) standard

BL-A1612-MINI SPECIFICATIONS
   Laser Working Area:  400 mm × 300 mm (16 in x 12 in)
   Working Area Depth:  5/8" (standard) / (optional) manual up and down table for 75 mm (3 in) movement 
   Sealed CO2 Laser:  40 Watt / 50 Watt (optional with up and down table)
   Closed Loop Chiller (distilled water):  All lasers include chillers that are properly sized to laser power
   Laser Table for Cutting:  Honeycomb table (standard)
   Laser Beam Delivery:  63 mm (2.5 in) focus lens with nozzle
   Rotary:  none (standard) / (optional with up & down table) surface drive rotary
   Operating Systems:  Windows 2000/XP
   Supported Graphics:  BMP, HPGL, PLT, DXF, DST, AI
   Compatible Design Software:  NewlyDraw / CorelDraw & AutoCAD (optional with up & down table)
   Data Transfer Interface: Parallel Port / USB (optional with up & down table)
   Motors: Stepper
   Resolution:  ±0.1 mm (± 0.004 inch). 1200 DPI
   Engraving Speed:  0-60,000 mm/min (0-2,400 in/min)
   Exhaust and Filtration:  Exhaust Blower with two hoses (standard) / Filtration System 
   Power supply:  AC 110 - 220 V ±10%, 50 - 60 Hz 
   Operating Temperature: 0 - 45 DEG C (32 - 112 DEG F)
   Operating Humidity:  5% - 95%
   Machine Power Requirements (excluding chiller):  < 1000 watts (standard)
   Machine Dimensions (excluding chiller):  76 cm x 44 cm x 72 cm (30 in x 17.5 in x 28.5 in)
   Machine Weight: 25 kg (55 lbs) standard
   Packaging Dimensions and Weight: 113 cm x 77 cm x 65 cm 123 kg (44 in x 30 in x 26 in 270 lbs) standard