SG赛车在线投注

• Used laser machine buyers, be sure to test before you purchase
• Used medical lasers, CO2 lasers, check the power prior to purchase.  Includes surgical CO2 lasers, veterinary surgical CO2 lasers, Luxar, Lumenis, Accuvet, Aesculight, light scapel, and other popular brand names.
• New laser tubes should be tested against the manufacturer specification
• Determining laser optics absorption for replacement
• For warranty claims on laser tubes. Ensure that you get the laser power that you paid for.
• Both the laser and its optical delivery degrades over time.  The power probe will verify this over the time period and the diagnosis will help to decide when to orer replacement parts
• To check or verify against internal power meters on laser systems. Even though an internal power meter shows a reading, this power probe will show the true reading of the laser output power.

Customers are saying:

• "Perfect item, great price and very fast delivery.. very satisfied also the communication with seller was perfect!"
• "It's a great product and I didn't have a problem with shipping or anything at all"
• "Nice communications, cheaper shipping cost than expected."
• "At this moment we still negotiating with the manufacturer about the warranty that is on the laser tube. [after using Mahoney power probe]"
• "I watched the video on youtube and wanted to test power before making the decision to upgrade my Epilog Laser."
• "I got different readings from the tube to the focus nozzle(with the focus lens removed). 60 watts at the tube and 45 watts at the first mirror 38 at mirror 2 and 30 at mirror 3. [Cleaning the] dirty mirrors brought the power up to about 55 watts at the nozzle"
• "... my 120w has only 60w @ the table. All optics are clean and beam is aligned.  The laser is still under warranty so Epilog should take care any issues."

Customers Q&A:

• Q:  "... a new 50 watt machine @99% power gave a reading of 35 Watts China CO2 Laser.  Are they usually over rated? and an older 40 watt machine gave reading of 15 watts. This machine was not consistent when cutting this reading may indicate problem."
• A:  35 watts is too low for a new 50 watt tube.  For China CO2 glass laser tube suppliers, typically the stated value is the maximum value (except for RECI).  For example, an 80 watt tube brand new will put out 76 watts or 74 watts.  But 35 watts is a significant chunk less than 50 watts.  That is a 15 watt reduction, or 35/50*100% = 70% of the rated power.  Much too low.  I would suggest the following approach:1. Measure the laser output power prior to the first beam bending mirror (to ensure that the problem is not misalignment or a bad optic).2. Measure the diameter and length of your laser tube and check the measurements for the power level for that tube. Typically, the measurements can be found on eBay seller listings, so search co2 tube 50w to get the measurements. The purpose of this check is to determine whether you received a 50 watt tube or a 35/40 watt tube instead.  3. If it is 50 watts by the sizing, and 35 watts prior to the first mirror then contact the manufacturer for money back, or a replacement, etc.
  For the 40 watt tube, you had a question about it having an intermittent problem.  For this case, use a bucket of water to cool the probe between tests.  Then, take 3 tests at the same power to level to check the tube.   You can try different power levels as well, such as 50% and 75%.  I find that the Chinese glass tubes tend to go from the top and bottom, leaving the middle powers active.  For example, if you previously had laser output at 18% you may only get it now starting at 25%.

SG赛车计划5码一期

SG赛车官方网址

Different monitors for different models and laser powers. Inquire with your model.

• Prevent costly damage to the most expensive part of your Epilog Laser machine--the laser itself. Get early warning signals of degrading or bad parts and take action before it costs you a very expensive laser replacement.
• Aids in preventing costly downtime resulting in lost customers, lost production time, and an expensive emergency laser replacement purchase by showing laser degradation over time and thus permitting a planned maintenance schedule.
  
• See live performance diagnostics of your laser while running each and every job by placing the small monitor in a visible location.
• Provides instant diagnostics on problems for damaged or older lasers that need repairs, simply plugging in then running the laser permits you to determine which components may need repair.
• Saves hard earned cash by enabling laser component problem identification and specific repair, thus doing away with that standard line "You need a new laser" and breaks it down to what is the problem and how do we go about fixing it for a reasonable price.

Mahoney CO2 Laser Monitor: $94 while supplies last